Material Dealing with Electrical power UNIT two
General Description
This electrical power unit characteristics electrical power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the lowering pace controlled from the stress compensated flow control valve. Goods of this series is often widely used in the market of logistic gadgets including fork lift, mini lift table, etc.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic elements concerned prior to mounting the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is needed just after the preliminary 100 operation hours,afterwards once each 3000 hrs.
5. The energy unit ought to be mounted horizontally.

Materials Dealing with Power UNIT 1
Standard Description
This electrical power unit is intended for that fork lift business, consisting of hugely productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down movement are managed through the lever on the guide release valve, and that is equipped with an electrical switch to activate the motor. The lowing pace is managed through the strain compensated movement manage valve.
Particular Notes
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned ahead of set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is needed just after the original one hundred operation hrs, afterwards as soon as each 3000 hrs.
five. The power unit proven is designed to be mounted horizontally.