• Electric motor gearboxes are maintenance-free, small power resources for driving vent, display screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your own needs.
• Key feature of these drives are a self-braking worm gear transmission and an integral linear limit switch device.
shaft-installed gear motors are finish electromechanical drives in which the speed of the installed electric motor is reduced to the desired value using two to 4 reduction stages. The drives are powerful and durable and feature a concise and lightweight design.
The compact design is made possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight-loss compared to commercially offered drive motors. This is accomplished through the constant application of aluminium die casting technology, which ensures a high degree of rigidity for the gear and motor housing at the same time.
Each drive is produced and tested particularly for every order and customer. A sophisticated modular system allows for an excellent diversity of types and a maximum degree of customization to consumer requirements.
Because of their integrated control products, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, defined end positions are secured by two placement limit switches. This uncomplicated alternative does not only simplify the cabling, but also makes it possible to configure the finish positions efficiently. The high shut-off accuracy of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and stop after set number of turns. Then it can open and close the windows for greenhouse ventilation to right positions.
To maintain the delicate environment in the greenhouse, weather control systems certainly are a necessity. Several mechanical systems can be applied in this respect; however glass vent drive systems have a tendency to be the most famous. The drive system includes a central gearmotor linked to a 40:1 correct angle reducer with dual result shafts. These OP shafts hook up to lengthy jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open and close large cup screen panes in the ceiling for temperature control.
Depending on the size of the application form (length of the shafting, amount and weight of the window panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application form Is generally intermittent used; nevertheless the motors are ranked continuous since the glass pane home windows may potentially be under constant, subtle adjustment during the day.
Gear Motor, also known as Engine Gearboxes, is a particular kind of electrical motor that’s designed to produce high torque whilst maintaining a minimal horsepower, or low speed, motor output. Gear motors are available in many different applications, specifically for the greenhouse, livestock and agricultural industry, our motors are available options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be quickly taken out without disturbing the entire shaft.
shaft-installed gear motors are finish electromechanical drives in which the speed of the installed electric motor is decreased to the required value using two to 4 reduction stages. The drives are powerful and durable and show a compact and lightweight design.
Here is a bank of info on the subject greenhouse gear motor.